Your Industrial Automation & IoT Expert
0
Product Finder
Energy 9 Results Print this Page
Image MFG. Part # Description MFG. On Hand Price From
RGDAT RGDAT is a device designed to be installed in the MV bays of remote controlled secondary substations in order to detect the presence of faults and power failures on the line. The MV line is monitored by means of 3 current transducers (CT), supplied with the device, and using the voltage signals delivered by 3 capacitive dividers, supplied as an optional feature together with the support and fastening kit. The purpose of RGDAT is to signal the status of the section of MV line monitored via relay outputs and to provide, via a 4/20 mA analog output, an indication of the current value on one of the phases. RGDAT can be completely configured and programmed from a portable Personal Computer connected by means of the RS232 serial port. The RGDAT application program can also be updated from the PC. RGDAT is based on a powerful 32 bit microprocessor belonging to the latest generation (ARM), capable of executing 60 million instructions per second; this allows a Fourier analysis to be performed on all analog inputs, acquired at a frequency of 3000 samples per second. RGDAT includes 3 alarm relays and 8 LED status indicators, visible on the outside of the enclosure. DUCATI -
DV966 The DV966A2NCI is an in-line processing and control device to be installed in Primary Substations (conversion from high to medium voltage) by ENEL Distibuzione managed with isolated or compensated neutral. The main purpose of the DV966 is to ensure, by means of the automatic functions of the neutral state controller (NSC), the correct arrangement of the IMS in relation to the layout of the compensation coils. The DV966 performs local processing of medium complexity such as: NSC logic, minimum continuous voltage protection, interface with portable PC management software. The DV966 is fully configurable and programmable by means of a portable personal computer connected via ETHERNET. The DV966 application program can also be updated on site via ETHERNET. DUCATI -
Digital Fault Recorder The Fault Recorder is a digital recording device capable of acquiring and simultaneously memorising up to 32 analogue and 128 digital inputs. All analogue and digital inputs, as well as the power supply are galvanically isolated (from one another and in relation to earth) for up to 2kVRMS. The digital fault recorder is fully configurable and programmable using a personal computer connected via serial port or Ethernet. The application program of the device can be updated locally and remotely. The housing is made entirely of steel and fitted with handles; its dimensions are standard for a 19” rack (9 units high, 400mm deep) and it can be supported purely by the fastening screws on the front. The protection level is IP30 in the front and IP20 in the other areas. Connections are executed by means of screw terminals suitable for receiving flexible conductors up to 4mm2 for analogue inputs and up to 2.5mm2 for other inputs. DUCATI -
TPT 2000 The TPT-2000 is a device for the remote control and supervision of the Primary Substation (conversion from High Voltage to Medium Voltage) by ENEL Distribuzione. The TPT-2000 communicates with central ENEL equipment (Centre) for: forwarding remote controls received from the Centre to the field; acquiring and making available to the Centre the information relating to the status of manoeuvre components and to the safety and check devices installed in the systems; send the value of the analog measurements from the system to the Centre. TPT-2000 implements local processing of medium complexity, aimed at correlating input signals and transmitting to the Centre the signal of the synthetic event that generated them. Communication between TPT-2000 and Centre uses standard Internet protocols and is based on the following types of vector: Ethernet on optic fibre; modem on dedicated 2- or 4-wire lines; modem on dial-up telephone network (PSTN) or GSM.  DUCATI -
DV928 The DV928A2NCI is a monitoring device to be installed in Primary Substations (conversion from High Voltage to Medium Voltage) by ENEL Distribuzione managed with isolated neutral or compensated neutral. The main purpose of the DV928 is to evaluate the efficacy of ground fault blow-out systems (Petersen coil, shunt, etc.), on MT networks with isolated or compensated neutral and to perform several system monitoring functions useful for diagnostic purposes (checking of MT switch opening and shunt times). The DV928 implements local processing of medium complexity, aimed at correlating input signals and transmitting synthetic event word signals to the Centre, via the TPT-2000. The DV928 is entirely configurable and programmable via a portable Personal Computer connected via ETHERNET. The DV928 application program can also be updated on site via ETHERNET. DUCATI -
DV902A2 The DV902A2 is a transducer for remote measurement and monitoring of the directional energetic parameters to be installed in Primary Substations (conversion from High to Medium voltage) by ENEL Distribuzione. It provides a display for instant and easy reading of measurements, current loop outputs 4-20mA for monitoring, one switching contact for some plant function control; ModBus RTU protocol on Rs485 isolated line, and its power supply can be in AC or DC.  DUCATI -
Peripherals DUCATI -
SAS 2006 DUCATI -
BCU (Bay Control Unit) DUCATI -
For any item showing no stock on hand, most likely we can get for YOU. Just give us a call or send us online RFQ.
© 2017 Cplus Electronics, Inc. All Rights Reserved. | Powered by Rootways
TOP