Your Industrial Automation & IoT Expert
0
Product Finder
Identification Systems 4 Results Print this Page
Image MFG. Part # Description MFG. On Hand Price From
Identification-System-CIS3 Description The Identification System CIS3 is the predominantly used standard system in the CIS system family. The CIS3 features compact data carriers. Typical applications are, for example, the coding of circulating product carriers or larger tools. The data carriers are screwed on the product to be identified, or the round design is bonded in a countersunk hole. The antenna and the interface electronics are fully integrated in the read heads and the read/write head. The data carrier and the head contain rod antennas. This configuration requires mounting with the same orientation of the head and data carrier. This orientation can be seen from a printed arrow marking. This fact means that the data carrier must approach the head in the direction of the arrow. The data carriers can be read when static or even moving at relative speed in front of the read head, i.e. on moving past. As a result the system is suitable, for instance, for moving product carriers. The data carrier must always be static for writing. Features Low-cost read/write system with predominantly used, separate read-only heads Extremely compact head design, no separate interface adapter required Read distance maximum 18 mm Dynamic reading with a relative speed up to 410 mm/s Data carrier memory capacity 16 bytes E2PROM read/write memory Easy connection of the read-only heads to I/O on any control system via 4-bit parallel interface (24 V) Read/write heads with serial interface RS232 More information You will find further information in our product catalog. EUCHNER -
Identification-System-CIS3A Description The Identification System CIS3A is used if somewhat larger read distances are required. As a result a larger data carrier is necessary. The data carrier is screwed on the product to be identified. The antenna and the interface electronics are fully integrated in the read heads and the read/write head. The data carrier and the head contain round antennas. The orientation of the data carrier in relation to the head is unimportant. This fact means that the data carrier can approach the head from any direction. The data carriers can be read when static or moving at low relative speed in front of the read head, i.e. on moving past. The data carrier must always be static for writing. Features Low-cost read/write system with predominantly used, separate read-only heads Extremely compact head design, no separate interface adapter required Read distance maximum 28 mm Dynamic reading with a relative speed up to 230 mm/s Data carrier memory capacity 16 bytes E2PROM read/write memory Easy connection of the read-only heads to I/O on any control system via 4-bit parallel interface (24 V) Read/write heads with serial interface RS232 More information You will find further information in our product catalog. EUCHNER -
Identification-System-CIS3A-Mini Description The innovative Identification System CIS3A-Mini is used if there is very little space to fit a data carrier to the product to be identified, or if there is very little space available for the read head. Incredibly small dimensions characterize the CIS3A-Mini where the read/write head and data carrier are concerned. Typical applications are for example tool identification or modern, very complex compact assembly installations with small product carriers. The round data carriers are bonded in a countersunk hole. Due to the high quality design of the data carrier with ferrite core, a relatively large read distance is even achieved on installation in metal, despite the small antenna. The antenna and the interface electronics are located in separate housings and are connected via a special connection cable. The data carrier and the head contain round antennas. The orientation of the data carrier in relation to the head is unimportant. This fact means that the data carrier can approach the head from any direction. The data carrier can only be read or written if it is static in front of the read head. Features One of the smallest plug-in read/write heads Interface adapter for fitting on the mounting rail in the control cabinet Miniature read/write head, dimensions M12 x 39 mm Miniature data carrier, diameter 10 x 4 mm Read distance: max. 6.5 mm (static, on installation in non-metallic material) Data carrier storage capacity: 116 bytes EEPROM read/write memory Easy connection of the read-only adapter to I/O on a control system via 4-bit parallel interface (24 V), max. 4 bytes of the data carrier usable Read/write heads with serial interface RS232 or RS422, complete memory of 116 bytes usable More information You will find further information in our product catalog. EUCHNER -
Transponder-Coding-software Product description The Transponder Coding (TC) software is an ASCII/hex editor that can be used to read and write the CIS data carrier or EKS Electronic-Key on the PC. Overview Byte-wise editing of the data Storage of the data as ASCII or hex file on the PC More information Use for the identification system CIS In conjunction with read/write stations with serial interface For CIS3, CIS3A data carriers with 16 bytes of read/write memory or CIS3A-Mini data carriers with 116 bytes of read/write memory Display of the programmed data on the data on the data carrier in the ASCII and hex view Use for the Electronic-Key-System EKS In combination with the Electronic-Key adapter read/write with serial interface or USB interface For Electronic-Key with 116 bytes of read/write memory and 8 bytes of fixed-code memory (serial number) Display of the programmed Electronic-Key data in ASCII and hex view, as well as the serial number in hex view System requirements Operating system: Microsoft Windows¨ XP / Server 2003 / Server 2008 32-bit / Server 2008 64-bit / Windows¨ 7 32-bit / 64-bit / Server 2008 R2 Processor: from Pentium 2 Available memory: min. 64 MB Network: network card and TCP/IP protocol installed Hard disk space for the installation: approx. 20 MB Interfaces: serial or USB (depending on version of the read/write device) EUCHNER -
For any item showing no stock on hand, most likely we can get for YOU. Just give us a call or send us online RFQ.
© 2017 Cplus Electronics, Inc. All Rights Reserved. | Powered by Rootways
TOP