Manufacturer Part # : Evaluation-units-CES-AZ
Manufacturer : EUCHNER
Description : Monitoring outputs Start button Feedback loop Unicode or multicode evaluation units Guard lock monitoring More information CES evaluation units combine transponder evaluation and a safety relay in one device The CES evaluation units have two enable paths and monitoring outputs for each read head connected. Depending on the series, the devices have additional monitoring outputs, as well as connections for a monitored Start button and feedback loop. Start button Evaluation units with a connection for a Start button permit a monitored, manual start. The relay is started by actuating a button. The button is monitored for jamming or possible tampering (monitoring of the falling edge). Prior to starting the evaluation unit, the safe state of the safety components connected must be re-established. Feedback loop Components connected downstream of the safety relay can be monitored for correct function. For this purpose normally closed contacts on these components are integrated into the feedback loop on the evaluation unit. Unicode evaluation units With the unicode version, the actuators must be taught-in on the evaluation unit. During teach-in the actuator code is assigned to the evaluation unit. This code is saved in the evaluation unit. Whenever an actuator is read, the evaluation unit compares the code just read with the code saved. Only if the two bit patterns are identical, the actuator is recognized and the enable paths are closed. The number of possible teach-in operations is dependent of the evaluation unit used. Only the last actuator taught-in is detected. The unicode principle provides a high level of protection against tampering. Multicode evaluation units Unlike systems with unique code detection, with multicode evaluation units a specific actuator code is not requested, instead it is only checked whether the actuator is of a type from EUCHNER that can be detected by the system (multicode detection). There is no exact comparison of the actuator code with the co
